[bjorneoen]

Hi!

I just collected some bootmod3 datalogs for my stage 2 tuned 420ix F36 and i wonder if anyone can take a look on the logs to determine if it looks good or bad. The car feels fine and runs great. It doesn't have any problems that i know and the datalogs looks ok according to my knowledge. The only thing i have noticed is that cylinder 3 ignition timing is always pulled more than the the others. Not 100% consistently but in most of my datalogs, the timing of cylinder 3 is pulled differently than the rest.

Car: 2016 F36 420i xDrive
Odometer: ~50k km
Gas: 91 octane
Ambient temp: 45-50 F / 7-10 C
Elevation: sea level
Motor: N20 EWG
Tune: Stage 2 bootmod 3 and Stage 3 xHP transmission
Spark plugs: Changed recently (BMW Original 12120039664)
Coils: stock, ~50k km
Oil: Changed recently
Engine mods: Wagner HighFlow cat & Evo2 Comp IC, Injen intake, 3" exhaust
Test: 3rd gear WOT

3 datalogs in 3rd gear WOT.
https://www.bootmod3.net/log?id=65f3...8686674832d7e9
https://www.bootmod3.net/log?id=65f3...c45c0d8aa083af
https://www.bootmod3.net/log?id=65f3...8686674832d9d3

Any things i should be worried about? Maybe i should try swapping/changing coil on cylinder 3?

Thanks in advance