|
|
|
07-29-2013, 03:36 PM | #1 |
Private
11
Rep 64
Posts |
Clutch pedal stuck at launch
So I was doing some 0-60 runs the other day and on one of the launches the clutch pedal stayed depressed for about a second after i released it before it came back up. I had the rpm at about 3500 maybe a bit higher for the launch. This only happened once and didn't happen again for the rest of the launches. I did about 3 or 4 after that. I know some people have the experience with the clutch going down and not coming back up at idle or just starting at a red light, but i couldn't find anything that matched my situation. Any idea what that could have been? It's been driving me crazy
|
07-29-2013, 10:38 PM | #2 |
Brigadier General
295
Rep 3,350
Posts |
Just happened to my 2008 during a normal start. It was in first gear, and I had my foot on the brake with the clutch depressed. When the engine started it lurched forward and stalled. The clutch pedal stayed on the floor, and I had to pull it back up manually. The dealer replace the clutch slave cylinder.
|
Appreciate
0
|
07-30-2013, 11:38 AM | #5 |
Supreme Allied Commander
3886
Rep 54,519
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Happened on my 190e... it is most likely the slave cylinder that has gone bad.
-Mike |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
135i, clutch |
|
|