Is required coding for LED conversion

poseidonhkg · 10-12-2015, 03:14 AM

Hello, I got a error code A66D and flickering is occurred to entire lights when start up the engineer. Is coding help for this issue please?

I have replaced the following to my 2006 PerLCI 330i E91(non idrive)
1- front turn signal to LED bulbs
2- side marker to LED bulbs
3- tail lights to LED

Which module and which function is involved, please advise.

Dtype · 10-12-2015, 03:50 AM

Code out frm for bulb check.

matteblue3er · 10-12-2015, 01:07 PM

Code out cold and warm bulb checks for front and rear turn signals. There is no check for side markers on the fenders.

nick380 · 10-12-2015, 04:16 PM

Quote:

Originally Posted by poseidonhkg

Hello, I got a error code A66D and flickering is occurred to entire lights when start up the engineer. Is coding help for this issue please?

I have replaced the following to my 2006 PerLCI 330i E91(non idrive)
1- front turn signal to LED bulbs
2- side marker to LED bulbs
3- tail lights to LED

Which module and which function is involved, please advise.

Where did you get those rear LED tail lights and what are they called?! They look awesome!

dbworld4k · 10-12-2015, 05:21 PM

Search for coding out bulb checks. Plenty of info out here.

NYBulldog · 10-12-2015, 07:52 PM

Damn that rear end looks tits!

poseidonhkg · 10-13-2015, 01:36 AM

Quote:

Originally Posted by matteblue3er

Code out cold and warm bulb checks for front and rear turn signals. There is no check for side markers on the fenders.

Thanks for matteblue3er.

Is included fog rear light as well please? Or the rear fog light is separated?

I remembered the sequence of LED replacement and we tested everything once it's installed.

1. Angel eyes and front turn lights > no error
2. Side markers > no error
3. Taillight outer section > no error
4. Tailight inter (lid area) > error

BTW, one more question!!! If it's turned off, would I get error code if it's real failed.

10-12-2015, 03:14 AM	#1
poseidonhkg Private 10 Rep 51 Posts Drives: 330i Touring Join Date: Aug 2015 Location: Hong Kong iTrader: (0)	Is required coding for LED conversion - PreLCI E91 Hello, I got a error code A66D and flickering is occurred to entire lights when start up the engineer. Is coding help for this issue please? I have replaced the following to my 2006 PerLCI 330i E91(non idrive) 1- front turn signal to LED bulbs 2- side marker to LED bulbs 3- tail lights to LED Which module and which function is involved, please advise. Attached Images Last edited by poseidonhkg; 10-12-2015 at 04:11 AM..
	Appreciate 0 Tweet Quote

10-12-2015, 03:50 AM	#2
Dtype First Lieutenant 36 Rep 398 Posts Drives: BMW F30 320d Join Date: Aug 2013 Location: Lisbon iTrader: (0)	Code out frm for bulb check.
	Appreciate 0 Quote

10-12-2015, 01:07 PM	#3
matteblue3er Captain 238 Rep 947 Posts Drives: Racecar Join Date: Jul 2015 Location: Philly iTrader: (0)	Code out cold and warm bulb checks for front and rear turn signals. There is no check for side markers on the fenders.
	Appreciate 0 Quote

10-12-2015, 05:21 PM	#5
dbworld4k Banned 586 Rep 2,233 Posts Drives: '12 M3 Join Date: Mar 2008 Location: YYZ iTrader: (5) Garage List 2002 BMW M5 [10.00] 2009 BMW 335i [10.00]	Search for coding out bulb checks. Plenty of info out here.
	Appreciate 0 Quote

10-12-2015, 07:52 PM	#6
NYBulldog Specialist 1312 Rep 2,708 Posts Drives: Nikes Join Date: Jun 2010 Location: NuYawk iTrader: (19)	Damn that rear end looks tits! __________________
	Appreciate 0 Quote