Posts Tagged ‘f10 m5 tune’


0
0
0
42

Germany based Hartge has released the figures on its ECU software tune for the M5 and M6 good for 642hp and 810 Nm (597 lb-ft), representing an increase of +82 hp and +130 Nm (96 lb-ft) over the factory figures.

Hartge quotes a new 0-62mph time of 4.2 seconds with a top speed of 190mph (305kmh).

This is achieved with the ECU tune as well as a stainless steel exhaust system.

The Hartge F10 M5 below also showcases Hartge lowering springs which lowers the M5 by 25mm front … CONTINUED

PP-Performance BMW M5 F10 Hits 639 HP

09/25/2012 at 11:21 AM
0
0
0
38

PP-Performance share with us their latest numbers achieved on their Project F10 M5. They have managed to achieve 639.7hp 824.7Nm on the 2013 M5 with the PP-Performance ECU software remap tune for the S63Tu engine, modified downpipes, mufflers by Manhart Racing, and GruppeM carbon fiber air intake system.

Check out the dyno graphs inside.

0
0
0
39

Velos Designwerks video announcing their F10 M5 and F12/F13 M6 Stage 1 Performance Software Tune (for the S63Tu engine). Initial power gain estimates for the Stage 1 tune is roughly 73 hp and 80 lb ft of torque.

Presenting the 3D Design F10 M5!

04/27/2012 at 2:20 PM
0
0
0
88

We present the just released 3D Design F10 M5! The 3D Design program for the F10 M5 features a robust line of carbon fiber aerodynamic accessories including a front lip, low splitters, side skirts, rear diffuser, and trunk spoiler. In addition to these pieces the roof spoiler from their existing F10 line will also be compatible.

The F10 M5 line will not stop at the aerodynamic portion of the brand. 3D Design will have their trademark exhaust system developed with Arqray as a technology partner. Currently … CONTINUED

0
0
0
126

AC Schnitzer has revealed its ACS5 M5 Tuning Package ahead of its debut at the 2012 Geneva Motorshow next week. The ACS5 package features both cosmetic and performance enhancements.

The F10 M5′s already potent S63Tu motor receives a power increase (via ECU tune) to 620hp / 790Nm (582lb-ft) torque. The growl coming from the M5 is enhanced via the AC Schnitzer twin sports silencer with valve control, with its chrome tailpipes.

The M5 is lowered on AC Schnitzer suspension spring kit and wheel options are the Type VIII … CONTINUED

Autoshows
0
0
0
44

G-POWER officially announces the full details and specs on its F10 M5 Bi-Tronik III package for the 2012+ BMW M5. Here’s the skinny on the M5 Bi-Tronik III:

640hp (+80hp over factory M5)
573lb-ft torque (+72 over factory M5)
0-100kmh (62mph) in 3.9 seconds
VMAX removed to up top speed to 315kmh / 195mph
Stainless steel sport rear muffler with “Deeptone” technology (4 x 100 mm tailpipes)… CONTINUED

0
0
0
55

BMW tuner G-Power has announced on our facebook page. Their Stage 1 F10 M5 and F12/F13 M6 kit is good for pushing the V8 bi-turbo S63Tu engine to 640 hp / 575 lb-ft torque (780Nm) .

This is a +80hp / 74lb-ft gain over the new M5 and M6′s factory 560hp / 501lb-ft torque.

The G-Power F10 M5 tuning program offers:

G-Power Stage 1 tune – 640hp/780Nm (575 lb-ft) with VMAX removal. Good for more than 310km/h (192mph)
Quad stainless steel … CONTINUED

0
0
0
27

Since its recent European market introduction, many a M5 fan has been waiting to see the tuning potential of the new F10 M5 and its beefy 560hp bi-turbo S63Tu engine. The first F10 M5 ECU tune has now been released, by the German tuning company, PP-Performance.

They were recently able to crack the factory ECU and their Stage 1 tune added:

Gains: +60hp and +70Nm (51lb-ft) torque
New total output: 620 HP / 750Nm (553lb-ft) torque

The price for the stage 1 tune has been set at 3,499 € (euros). … CONTINUED